Central Pneumatic 67696 Manuel du propriétaire télécharger pdf (Page 3)

WARNING:

Read and understand all instructions. Failure to

follow all instructions listed below may result in electric

shock, fire, and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents. Floor must

not be slippery from wax or dust.

Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable

liquids, gases, or dust. Power tools create sparks

which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while

operating tools. Distractions can cause you to lose

control.

Operate air compressor in an open area at least 18

in. away from any wall or object that could restrict

the flow of fresh air to ventilation openings.

ELECTRICAL SAFETY

Avoid body contact with grounded surfaces such as

pipes, radiators, ranges, and refrigerators. There is an

increased risk of electric shock if your body is grounded.

Don’t expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

Do not abuse the cord. Never use the cord to carry

the tool or pull the plug from an outlet. Keep cord

away from heat, oil, sharp edges, or moving parts.

Replace damaged cords immediately. Damaged

cords increase the risk of electric shock.

When operating a power tool outside, use an

outdoor extension cord marked “W-A” or “W”.

These cords are rated for outdoor use and reduce the

risk of electric shock.

PERSONAL SAFETY

Eye protection which conforms to ANSI specifica-

tions and provides protection against flying

particles both from the FRONT and SIDE should

ALWAYS be worn by the operator and others in the

work area when loading, operating, or servicing

this tool. Eye protection is required to guard against

flying fasteners and debris, which could cause severe

eye injury.

The employer and/or user must ensure that proper

eye protection is worn. We recommend a Wide Vision

Safety Mask for use over eyeglasses or standard safety

glasses that provide protection against flying particles

both from the front and side. Always use eye protection

which is marked to comply with ANSI Z87.1.

Additional safety protection will be required in

some environments. For example, the working area

may include exposure to a noise level which can lead to

hearing damage. The employer and user must ensure

that any necessary hearing protection is provided

and used by the operator and others in the work

area. Some environments will require the use of head

protection equipment. When required, the employer

and user must ensure that head protection marked to

comply with ANSI Z89.1 is used.

Stay alert, watch what you are doing, and use

common sense when operating a power tool. Do

not use tool while tired or under the influence

of drugs, alcohol, or medication. A moment of

inattention while operating power tools may result in

serious personal injury.

Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair, clothing,

and gloves away from moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts.

Do not overreach. Keep proper footing and balance

at all times. Proper footing and balance enables better

control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection.

Dust mask, nonskid safety shoes, hard hat, or hearing

protection must be used for appropriate conditions.

Do not use on a ladder or unstable support. Stable

footing on a solid surface enables better control of the

tool in unexpected situations.

GENERAL SAFETY RULES

WARNING:

The cord of this product contains lead, a chemical

known to the State of California to cause cancer, and

birth defects or other reproductive harm. Wash hands

after handling.

(California Health & Safety Code § 25249.5, et seq.)

TOOL USE AND CARE

Do not exceed the pressure rating of any

component in the system.

Protect material lines and air lines from damage or

puncture. Keep hose and power cord away from sharp

objects, chemical spills, oil, solvents, and wet floors.

Check hoses for weak or worn condition before

each use, making certain all connections are

secure. Do not use if defect is found. Purchase a

new hose or notify an authorized service center for

examination or repair.

Release all pressures within the system slowly.

Dust and debris may be harmful.

Store idle tools out of the reach of children and

other untrained persons. Tools are dangerous in the

hands of untrained users.

1 2 3 4 5 6 7 8 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Central Pneumatic 67696 Manuel du propriétaire Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Compresseurs d'air Central Pneumatic 67696