Central Pneumatic 92917 Instructions d'exploitation télécharger pdf (Page 7)

Page 7SKU 92918 For technical questions, please call 1-800-444-3353.

Loading Coil Nails

ALWAYS WEAR ANSI APPROVED IMPACT SAFETY GOGGLES WHEN

RELOADING OR DOING ANY OTHER MAINTENANCE ON THIS TOOL.

Other people in the work area must also wear ANSI approved impact safety

goggles.

Warning! Make sure the Nailer is not attached to the air hose whenever loading it.

1. Rotate the Trigger Lock (28) to the locked position, as shown on page 6 and

below. To open the Canister (100), press down on the Door Latch (32) and swing

the Door (34) and Canister Cover (94) open.

2. Check the Canister Platform (96) inside the Canister (100). The Platform can be

adjusted up and down to use various lengths of nails from 1

”* to 2

”:

*To help prevent jamming, nails under 1

” must be wire collated.

A. For 1

” to 1

” Long Nails: Use first (top) setting

B. For 1

” to 1

” Long Nails: Use second setting

C. For 2” to 2

” Long Nails: Use third setting

D. For 2

” to 2

” Long Nails: Use fourth (bottom) setting

3. Place a coil of nails around the Canister Platform (96) in the Nail Canister (100).

4. Uncoil enough nails to reach the Feed Pawl (87). Place the

second

nail on the coil

between the teeth of the Feed Pawl, making sure the nail head fits in the slot in the

upper portion of the Feed Pawl.

5. Swing the Canister Cover (94) closed. Then, close the Door (34). Make sure the

Door closes securely. If it does not engage, the nail head is not in the slot in the

upper portion of the Feed Pawl (87).

CANISTER

COVER (94)

CANISTER (100)

NAILS

CANISTER PLATFORM (96)

(LIFT AND TURN

TO ADJUST)

DOOR

(34)

FEED

PAWL (87)

TRIGGER LOCK (28)

LOCKED

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Central Pneumatic 92917 Instructions d'exploitation Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Pistolet à clous Central Pneumatic 92917