Central Pneumatic 47016 67181 Manuel du propriétaire télécharger pdf (Page 3)

Page 3For technical questions, please call 1-888-866-5797.Item 47016 67181

NOTICE

Clean the Spray Gun IMMEDIATELY after EVERY use.

Delayed or inadequate cleaning will permanently clog the Spray Gun.

Latex paint hardens quickly and permanently inside Spray Gun.

SAFETYOPERATIONMAINTENANCE SETUP

Personal Safety

a. Stay alert. Watch what you are doing and

use common sense when operating the tool.

Do not use the tool while tired or under the

influence of drugs, alcohol, or medication.

A moment of inattention while operating the

tool increases the risk of injury to persons.

b. Dress properly. Do not wear loose clothing

or jewelry. Contain long hair. Keep hair,

clothing, and gloves away from moving parts.

Loose clothes, jewelry, or long hair increases

the risk of injury to persons as a result

of being caught in moving parts.

c. Do not overreach. Keep proper

footing and balance at all times.

Proper footing and balance enables better

control of the tool in unexpected situations.

d. Use safety equipment.

Wear heavy-duty work gloves and a

NIOSH-approved respirator

during use. Non-skid safety shoes and

a hard hat must be used for the

applicable conditions.

e. Always wear eye protection.

Wear ANSI-approved safety goggles.

Tool Use and Care

a. Do not force the tool. Use the correct tool for the

application. The correct tool will do the job better

and safer at the rate for which the tool is designed.

b. Disconnect the tool from the air source

before making any adjustments, changing

accessories, or storing the tool. Such preventive

safety measures reduce the risk of starting the

tool unintentionally. Turn off and detach the air

supply, safely discharge any residual air pressure,

and release the throttle and/or turn the switch to

its off position before leaving the work area.

c. Store the tool when it is idle out of reach

of children and other untrained persons.

A tool is dangerous in the hands of untrained users.

d. Check for misalignment or binding of

moving parts, breakage of parts, and any

other condition that affects the tool’s

operation. If damaged, have the tool serviced

before using. Many accidents are caused

by poorly maintained tools. There is a risk

of bursting if the tool is damaged.

e. Use only accessories that are identified by the

manufacturer for the specific tool model. Use of

an accessory not intended for use with the specific

tool model, increases the risk of injury to persons.

Service

a. Tool service must be performed only

by qualified repair personnel.

b. When servicing a tool, use only identical

replacement parts. Use only authorized parts.

c. Use only lubricants supplied with the

tool or specified by the manufacturer.

1 2 3 4 5 6 7 8 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Central Pneumatic 47016 67181 Manuel du propriétaire Page 3

Commentaires sur ces manuels